An industrial belt that is designed to take a lot of abuse. Many will go 3000 miles and more. Check the tension adjusters location. If the axle sits about in the middle of the adjustment slot the belt is the right one. The most common belt is the 710mm. If the axles sit too close to the inside stop of the adjustment slot you will need to order a longer belt such as the 730mm. The 730 will give you just a bit more room. You will get about 1/4" of travel per 10mm difference. The longevity criteria has a lot to do with power application. The more you ease into it, the longer everything will last. Sounds a lot like life, doesn't it? |